1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Curious as to what this is ?

Discussion in 'CJ' started by rufus39, Jun 12, 2023.

  1. Jun 12, 2023 at 8:31 AM
    #1
    rufus39

    rufus39 [OP] Member

    Joined:
    Jun 12, 2023
    Member:
    #7869
    Messages:
    7
    Gender:
    Male
    Vehicle:
    1979 Renegade Cj5
    AMC 360
    Hey guys,
    I am brand new to both Jeeps and to this forum.
    Thanks in advance to anyone who may be able to help..
    I have just purchased a somewhat original paint 1979 renegade CJ5PXL_20230610_145453438.MP.jpg with the exception of a swapped out 360 engine ( originally a 304 ) ..
    I am looking around , trying to get acquainted with this jeep & under the Left rear Fender, at the backside of the rear panel, i found this part ? it looks to have been there a really long time..
    The line from it runs up to the engine compartment, but, it is not hooked up to anything. Any ideas as to what it's intended purpose is / was ?
     
  2. Feb 22, 2024 at 3:12 PM
    #2
    rick1956

    rick1956 has dirty fingernails

    Joined:
    Feb 21, 2024
    Member:
    #8550
    Messages:
    19
    Gender:
    Male
    First Name:
    Rick
    Edgewood, Washington
    Vehicle:
    81 CJ-7
    Lots of mods, but they were already in place. MY mods are REPAIRS!
    It looks like the remainder of your rollover fuel shutoff system... the rollover check valve?
    .
    .
     
    aggrex likes this.
  3. Feb 22, 2024 at 4:53 PM
    #3
    LYFZGOOD

    LYFZGOOD members

    Joined:
    Jul 22, 2017
    Member:
    #1701
    Messages:
    931
    Gender:
    Male
    Wv
    Vehicle:
    1998 Jeep Wrangler Sahara
    2.5” lift 32x11.50x15,cold air intake, Smittybuilt stainless steel Bumpers, rough county pocket flares,Rugged ridge seat covers and floor mats. Conversion LED headlights 20’ LED Light bar hardtop,soft top,bikini top.
    Show us some pictures.
    Welcome from North Central West Virginia
    :oldglory:
     
  4. Apr 8, 2024 at 2:24 PM
    #4
    258 Rocket

    258 Rocket Member

    Joined:
    Sep 18, 2022
    Member:
    #6748
    Messages:
    10
    Gender:
    Male
    First Name:
    Aaron
    Stock (with improvements)
    This is the plugged up end of the roll over check valve for a steel tank. the other end plugs into the charcoal canister, if it's still there. It can be easily replaced with an aftermarket check valve mounted high on the firewall.
     
To Top