1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Engine light and wired start

Discussion in 'General Jeep Discussion' started by moesJeep, Nov 5, 2020.

  1. Nov 5, 2020 at 5:12 PM
    #1
    moesJeep

    #1
    moesJeep [OP] New Member

    Joined:
    Nov 5, 2020
    Member:
    #5214
    Messages:
    1
    Gender:
    Male
    First Name:
    Maurice
    Vehicle:
    Jeep 4 door sarhara
    I drive a 2010 Jeep Sahara unlimited 3.6L if that matters. So my Jeep has started to not turn over very well. It takes about 3 minutes for it to start up and it started 2 nights ago and today it did it and the check engine light came on and it flashed change oil. I just did maybe a month ago and I don’t drive enough to need to change it yet. I tested my battery maybe 3 to 4 weeks ago. Any ideas?
     
    moesJeep, Nov 5, 2020
    #1
  2. Nov 5, 2020 at 6:47 PM
    #2
    aggrex

    #2
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,912
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    6375C7F3-E611-4027-9DFD-71BF1522BE91.jpg Local auto parts stores like Advance/Autozone provide free battery checkup and provide relative battery health. Under the hood check for good battery connections and remove corrosion. Inspect all the ground wire connections for corrosion.
     
    aggrex, Nov 5, 2020
    #2
Register FREE to Reply!
To Top