1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

A/C clutch won't engage

Discussion in 'Liberty' started by Shaunrobert, Jul 9, 2024.

  1. Jul 9, 2024 at 11:14 AM
    #1
    Shaunrobert

    #1
    Shaunrobert [OP] New Member

    Joined:
    Jul 9, 2024
    Member:
    #8771
    Messages:
    2
    Gender:
    Male
    Vehicle:
    2006 green
    Ac clutch will not engage. New clutch, new belt. Tried jumping with paper clip at relay... did nothing. Tried at the low pressure switch. Ran a jumper wire straight to the clutch plug... still nothing.
     
    Shaunrobert, Jul 9, 2024
    #1
  2. Jul 9, 2024 at 4:04 PM
    #2
    aggrex

    #2
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,878
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Failure for the clutch to engage could be low/zero refrigerant.
     
    aggrex, Jul 9, 2024
    #2
    LYFZGOOD likes this.
  3. Jul 12, 2024 at 9:48 PM
    #3
    Shaunrobert

    #3
    Shaunrobert [OP] New Member

    Joined:
    Jul 9, 2024
    Member:
    #8771
    Messages:
    2
    Gender:
    Male
    Vehicle:
    2006 green
    That's what the paperclip bypasses. That's the first thing I took care of.
     
    Shaunrobert, Jul 12, 2024
    #3
Register FREE to Reply!
To Top