1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

05 Liberty 3.7 ckt Intermittent Dtc p0339 And p0335

Discussion in 'Liberty' started by Jockski, Jul 3, 2017.

  1. Jul 3, 2017 at 1:12 PM
    #1
    Jockski

    #1
    Jockski [OP] New Member

    Joined:
    Jul 3, 2017
    Member:
    #1638
    Messages:
    2
    Gender:
    Male
    Hi folks, I just replace my fuel pump after it failed 10days ago,
    Pump replacement went well But I now seem to have problems with the engine management,
    DTC p0335 Crank position sensor A Circuit Malfunction, And
    DTC P0339 Crank position sensor A CKT Intermittent,

    Since the car sat so long I had to boost start the car And eventually just went and got a new battery, I have also cleared DTC P0339 But not been able to clear DTC P0335,
    The Car starts and drives But the rpm's will stutter at 2400rpm,

    Any help on this condition would be much appreciated
     
    Jockski, Jul 3, 2017
    #1
  2. Jul 3, 2017 at 5:41 PM
    #2
    chris4x4

    #2
    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Welcome! Check to make sure all fuel lines are free of cracks. Just throwing a stone since you replaced the pump.
     
    chris4x4, Jul 3, 2017
    #2
  3. Jul 3, 2017 at 7:14 PM
    #3
    Jockski

    #3
    Jockski [OP] New Member

    Joined:
    Jul 3, 2017
    Member:
    #1638
    Messages:
    2
    Gender:
    Male
    Update! I have a wiring issue in the harness, On the engine harness just behind the Oil filler there's a hard connection of about 5 or 6 blue wires all soldered together into 1 blue and 1 green wire, I've only been able to give it a pinch with my fingers But it has got it running good And I cleared the codes, il need to get into it closer and do a proper repair
     
    Jockski, Jul 3, 2017
    #3
    chris4x4 likes this.
  4. Jul 3, 2017 at 10:57 PM
    #4
    chris4x4

    #4
    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Thanks for their update!
     
    chris4x4, Jul 3, 2017
    #4
Register FREE to Reply!
To Top