1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Transfer case leak, almost empty

Discussion in 'Liberty' started by dstump86, May 10, 2017.

  1. May 10, 2017 at 4:50 AM
    #1
    dstump86

    #1
    dstump86 [OP] New Member

    Joined:
    May 10, 2017
    Member:
    #1449
    Messages:
    1
    Gender:
    Male
    First Name:
    Dave
    Vehicle:
    2012 Jeep Liberty
    I have a 2012 Jeep liberty with only 47000 miles on it. I took it in to get the oil changed and the guy told me my transfer case was leaking and almost empty. The time before that that I had taken it to a different shop and they didn't mention anything about the transfer case leaking. So I'm not exactly sure on how long it was empty. They topped it off for me and it seems to be ok but I'm concerned there might of been damage. And wonder how the leak was caused in the first place. Anyone ever have a similar issue?
     
    dstump86, May 10, 2017
    #1
  2. May 10, 2017 at 5:50 AM
    #2
    chris4x4

    #2
    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Welcome! Did you see the leak?
     
    chris4x4, May 10, 2017
    #2
    JKBob 25 likes this.
  3. May 10, 2017 at 6:41 AM
    #3
    OFFGRID

    #3
    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    And where did you take it? Do you have an extended warranty that is still in effect? If so take it to the dealership before it runs out and have them check it.
     
    OFFGRID, May 10, 2017
    #3
    JKBob 25 likes this.
Register FREE to Reply!
To Top