1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Transfer Case shift pattern

Discussion in 'General Jeep Discussion' started by rustbucket, Mar 16, 2017.

  1. Mar 16, 2017 at 2:38 PM
    #1
    rustbucket

    #1
    rustbucket [OP] Member

    Joined:
    Feb 5, 2017
    Member:
    #920
    Messages:
    5
    Gender:
    Male
    First Name:
    Ron
    Vehicle:
    1993 YJ
    Body removed due to rust
    Does anyone recognize a shift pattern where N is in the last position. Lever has three positions and a neutral but the neutral is in the last position.
     
    rustbucket, Mar 16, 2017
    #1
  2. Mar 16, 2017 at 5:51 PM
    #2
    chris4x4

    #2
    chris4x4 With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Interesting. What's it out of?
     
    chris4x4, Mar 16, 2017
    #2
  3. Mar 16, 2017 at 9:38 PM
    #3
    OFFGRID

    #3
    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    There are some drag racing transmissions th350,th400, and tf727 that I have heard of that run slightly different shift patterns that are more racing friendly.
     
    OFFGRID, Mar 16, 2017
    #3
  4. Mar 17, 2017 at 1:51 AM
    #4
    rustbucket

    #4
    rustbucket [OP] Member

    Joined:
    Feb 5, 2017
    Member:
    #920
    Messages:
    5
    Gender:
    Male
    First Name:
    Ron
    Vehicle:
    1993 YJ
    Body removed due to rust
    It's a 231. I'm not sure of its origin . It came as a rebuilt in with a project 93 yj project I bought. I've been looking for a shifter when I discovered the pattern.
     
    rustbucket, Mar 17, 2017
    #4
  5. Mar 17, 2017 at 8:25 AM
    #5
    OFFGRID

    #5
    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    If you have a 231 the shift pattern should be:

    2H
    4H
    N
    4L

    If it is in the Jeep and you are only getting 3 positions, you probably need to adjust your linkage out a little more in order to reach that last position.

    Here is a video on adjusting the linkage on a 231

    https://www.youtube.com/watch?v=rzwQPNbSWyQ
     
    OFFGRID, Mar 17, 2017
    #5
    chris4x4 likes this.
Register FREE to Reply!
To Top