1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

New fuel pump assembly issue looking for help

Discussion in 'Cherokee' started by Engir, Mar 7, 2025 at 4:25 AM.

  1. Mar 7, 2025 at 4:25 AM
    #1
    Engir

    #1
    Engir [OP] 1987 Jeep Cherokee Laredo

    Joined:
    May 18, 2024
    Member:
    #8684
    Messages:
    44
    Gender:
    Male
    Costa Rica
    Vehicle:
    1987 Jeep Cherokee Laredo
    none
    To expand on this when I bought my jeep the fuel gauge was not working I did a test with the multimeter and determined that the wiring and gauge was good (See my most recent post) now that I have replace it when I turn the key to the on position the pump does not stop running, the Jeep starts right up no issues but as far as I can tell the pump never stops running also the gauge (As you can see in previous post) is no longer on "E" it is "- E" meaning looking at the gauge face the needle is at the 8 O'clock position.

    Doing reach I am seeing the pump issue could be a relay but the wiring check showed no issues and other stuff is saying the pump assembly is bad.

    Where is the relay that I need to check to be sure and does anyone have any ideas of something for me to check for this issue?


    Thanks
     
    Engir, Mar 7, 2025 at 4:25 AM
    #1
Register FREE to Reply!
To Top