1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Multiple dash lights

Discussion in 'Electrical' started by Blackcloud, Oct 30, 2024.

  1. Oct 30, 2024 at 12:00 PM
    #1
    Blackcloud

    Blackcloud [OP] New Member

    Joined:
    Oct 30, 2024
    Member:
    #8968
    Messages:
    1
    Gender:
    Male
    Hello Jeepers!
    I had a problem with my 2014 Patriot not starting so I did a few ‘simpler’ things like checking relays and ignition switch before finally replacing the starter which solved that issue. While working on the ignition switch, the anti theft module came apart and I broke 2 tiny wires inside it. I resoldered them best I could and put it all together. The car runs great now but I have a ton of lights such as engine, traction, 4wd, and antilock brakes on. Could it be the antilock module causing this or did I do something else wrong?
     
  2. Oct 30, 2024 at 2:04 PM
    #2
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,901
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Back tracking everything you touched, broke/repaired would be my first step. Assuming you disconnected the battery before making repairs scan for any engine codes that may be reflective of the warning lights on the dash. I'm not familiar with the anti theft module but a new one might be the solution or at least remove a variable.
     
To Top