1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Can I swap out straight six in a cj5 1983 with a V6?

Discussion in 'CJ' started by CJDill, Feb 10, 2024.

  1. Feb 10, 2024 at 3:22 PM
    #1
    CJDill

    CJDill [OP] New Member

    Joined:
    Feb 10, 2024
    Member:
    #8532
    Messages:
    1
    Gender:
    Male
    I am fairly new owner and need advice
     
  2. Feb 11, 2024 at 10:57 AM
    #2
    shooter65

    shooter65 Well-Known Member

    Joined:
    Jun 19, 2023
    Member:
    #7893
    Messages:
    95
    Gender:
    Male
    Southwest PA
    Vehicle:
    2023 Rubicon 4 Door
    I'm not an expert at engine swaps but I'd be surprised if you couldn't. I assume you'll need a tranny swap also and source engine mounts, it will require new header pipes and probably stiffer suspension on the front.
     
  3. Feb 13, 2024 at 6:02 PM
    #3
    MTgeezer

    MTgeezer Well-Known Member

    Joined:
    Feb 28, 2022
    Member:
    #6297
    Messages:
    142
    Gender:
    Male
    First Name:
    John
    Vehicle:
    55 CJ 3B
    441 sbc/AGEM22W/"Super"D18/D44s-ARBs-Dutchman
    What is the incentive for this swap? If you are looking for more performance, it is unlikely you will find it unless you add two more cylinders to the hunt. And some V6's will come up far short of a 258 for off road wheeling including the pantystar 3.6. If you need a replacement engine, a late EFI 4.0 L straight six would be the go to. That will bolt in. Great low end torque and they last forever, 300k miles not being uncommon.
     
    shooter65 and aggrex like this.
To Top