1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Overheating problem fixed?

Discussion in 'Wrangler JK (2007-2017)' started by Gleek1, Nov 6, 2023.

  1. Nov 6, 2023 at 5:34 AM
    #1
    Gleek1

    #1
    Gleek1 [OP] New Member

    Joined:
    Nov 6, 2023
    Member:
    #8335
    Messages:
    1
    Gender:
    Male
    First Name:
    Greg
    Vehicle:
    2012 Wrangler Unlimited Sport
    I have had two check engine codes about bad thermostats and replaced them. My latest problem was overheating at freeway speeds but no engine light. Engine cooling fan was on constantly. Replaced thermostat again with Motorad recommended by Jeep parts guy at dealership. NAPA had it, cooling fine now, even the gauge is showing slightly below center and no fan running. Have replaced oil cooling tower, pressure sensor, oil pump and four thermostats in the last two months with only 68,000 miles on a 2012 Wrangler...what next?
     
    Gleek1, Nov 6, 2023
    #1
  2. Nov 6, 2023 at 4:07 PM
    #2
    aggrex

    #2
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,912
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    If you’re not experiencing any overheating problems then you should be GTG. You’ve replaced multiple parts already except the radiator.
     
    aggrex, Nov 6, 2023
    #2
Register FREE to Reply!
To Top