1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Complete build from frame up

Discussion in 'New Member Introductions' started by Brew, Feb 21, 2021.

  1. Feb 21, 2021 at 2:29 PM
    #1
    Brew

    #1
    Brew [OP] Member

    Joined:
    Feb 21, 2021
    Member:
    #5451
    Messages:
    9
    Gender:
    Male
    First Name:
    Bruce
    Vehicle:
    1974 CJ5
    BUILD IN PROGRESS
    Hello,i have a 1974 CJ5 that we are starting to build,i will post some pictures soon.
     
    Brew, Feb 21, 2021
    #1
    Bob and LYFZGOOD like this.
  2. Feb 21, 2021 at 3:28 PM
    #2
    LYFZGOOD

    #2
    LYFZGOOD members

    Joined:
    Jul 22, 2017
    Member:
    #1701
    Messages:
    983
    Gender:
    Male
    Wv
    Vehicle:
    1998 Jeep Wrangler Sahara
    2.5” lift 32x11.50x15,cold air intake, Smittybuilt stainless steel Bumpers, rough county pocket flares,Rugged ridge seat covers and floor mats. Conversion LED headlights 20’ LED Light bar hardtop,soft top,bikini top.
    Welcome from north central West Virginia :oldglory:
     
    LYFZGOOD, Feb 21, 2021
    #2
  3. Feb 21, 2021 at 6:45 PM
    #3
    aggrex

    #3
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,912
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome @Brew ...be sure to post up that CJ5 build thread with pics as it will be a good read.
     
    aggrex, Feb 21, 2021
    #3
    LYFZGOOD likes this.
  4. Feb 22, 2021 at 3:56 PM
    #4
    tmdougie

    #4
    tmdougie Member

    Joined:
    Feb 17, 2021
    Member:
    #5439
    Messages:
    13
    Gender:
    Male
    First Name:
    Terry
    Oh nice, looking forward to seeing those pics.
     
    tmdougie, Feb 22, 2021
    #4
  5. Feb 27, 2021 at 4:12 PM
    #5
    Brew

    #5
    Brew [OP] Member

    Joined:
    Feb 21, 2021
    Member:
    #5451
    Messages:
    9
    Gender:
    Male
    First Name:
    Bruce
    Vehicle:
    1974 CJ5
    BUILD IN PROGRESS
    Thanks guys. Well i have been working on the frame, welding some holes up that the PO made and i had to replace 10" of the back of the frame. The PO had some how ripped the shackle hangers out of the frame back there then welded angle to the frame and welded the hangers back on, what a cobble job .I cut that all out and had some channel formed and i welded them back on and installed new shackle hangers. Should be ready to go to the powder coater in about a week. While the frame is in getting powder coated i will be taking the axles and tranny over to the sandblasters.
     
    Brew, Feb 27, 2021
    #5
    Justanotherjeeper, JKBob 25 and aggrex like this.
  6. Mar 7, 2021 at 7:17 PM
    #6
    Bob

    #6
    Bob Well-Known Member Moderator

    Joined:
    Jul 18, 2016
    Member:
    #1
    Messages:
    793
    Gender:
    Male
    Bob, Mar 7, 2021
    #6
    JKBob 25 likes this.
Register FREE to Reply!
To Top