1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Bought a 1994 2.5 L put 33 in and a 3.5 lift.

Discussion in 'New Member Introductions' started by dnmhill2010, Oct 22, 2020.

  1. Oct 22, 2020 at 11:25 PM
    #1
    dnmhill2010

    dnmhill2010 [OP] New Member

    Joined:
    Oct 22, 2020
    Member:
    #5156
    Messages:
    1
    Vehicle:
    YJ 1994 2.5 l man33in 4.88 gears
    3.5 lift
    Hi all, just retired after 30 years in Army. Like all of you wanted an old Jeep and found one. The mods I have done so far are:(engine 120,000 miles.)17426C6D-5FEE-4E5C-BD82-15EB1B01D157.jpg
    1. Put in new transmission and clutch (never did one but through YouTube it was not hard but tedious.bought a lot of new tools.
    2. Changed out fuel injectors from single to four out.
    3. Replaced 3.5 in lift.
    4. Tore out carpet, and resprayed bed.
    5. Fixed dents and rust and repainted the Jeep. Never have done it, bought compressors, gun and followed great YouTube video.
    6. Put in new cold intake (and yes it dose work on take off)
    7. Redid brakes all around, again great YouTube.
    8. Having Jeep regeared to 4.88
    9. Cleaned and detailed engine and replaced all sensors.
    10. Changed out all fluids.
    11. Replace rear bumper and added tire gate.
    12. Changed out top.
    13. Rebuild top part of engine (lifters, rocket arms) no more clicking from engine.
     
    Bob likes this.
  2. Oct 23, 2020 at 12:08 AM
    #2
    LYFZGOOD

    LYFZGOOD members

    Joined:
    Jul 22, 2017
    Member:
    #1701
    Messages:
    983
    Gender:
    Male
    Wv
    Vehicle:
    1998 Jeep Wrangler Sahara
    2.5” lift 32x11.50x15,cold air intake, Smittybuilt stainless steel Bumpers, rough county pocket flares,Rugged ridge seat covers and floor mats. Conversion LED headlights 20’ LED Light bar hardtop,soft top,bikini top.
    Thank you for your service :oldglory:
    Welcome from north central West Virginia.
    Nice YJ.
    Thank goodness for YOUTUBE.
    More pictures please.
     
  3. Oct 23, 2020 at 6:37 AM
    #3
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,912
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome @dnmhill2010 ...first thanks for your service. Awesome project. Hope to bounce some questions off ya
     
  4. Oct 23, 2020 at 6:51 AM
    #4
    Bob

    Bob Well-Known Member Moderator

    Joined:
    Jul 18, 2016
    Member:
    #1
    Messages:
    793
    Gender:
    Male
    Welcome!
     
To Top