1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Tire size decisions.....

Discussion in 'Wheels & Tires' started by chris4x4, Jan 15, 2017.

  1. Jan 15, 2017 at 6:03 PM
    #1
    chris4x4

    #1
    chris4x4 [OP] With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Considering either a 285/75/17 or 305/70/17. More than likely its gonna be a Hybrid tire, rather than a full MT, or AT. Prices seem to be close, and the heights are the same, so I'm basically trying to decide if the extra width is beneficial. What thoughts do you folks have?
     
    chris4x4, Jan 15, 2017
    #1
  2. Jan 15, 2017 at 6:33 PM
    #2
    C2T

    #2
    C2T Well-Known Member

    Joined:
    Jul 31, 2016
    Member:
    #42
    Messages:
    763
    Gender:
    Male
    First Name:
    Richard
    Helena, Montana
    Vehicle:
    Jeep
    2.5" AEV Dual Sport lift, 35" Treadwright Guard Dogs, Black Rock Wheels, AEV Front & Rear Bumpers with Tire Carrier, Fuel Caddy 10 gal. Aux. fuel tank, Warn 9.5ti, 125' synthetic winch line, front axle skid, 20" LED light bar , Bilstein Shocks, steel steering skidplate,
    Neither really qualifies as a particularly thin tire, IMHO. However, I would run with the 285/75/17 if you can find the tire style you want in that size. You will usually get a much better ride on pavement with the thinner profile. Less wandering around and following ruts but no real negative side to them versus going with a .75" wider tire.

    Just my $0.02
     
    C2T, Jan 15, 2017
    #2
    Rc Jeep and chris4x4[OP] like this.
  3. Jan 16, 2017 at 7:05 AM
    #3
    Rc Jeep

    #3
    Rc Jeep Well-Known Member

    Joined:
    Sep 8, 2016
    Member:
    #190
    Messages:
    465
    Gender:
    Male
    First Name:
    Ryan
    Vehicle:
    '16 Rubicon
    Evo mfg front coil overs Evo mfg rear coil overs Jks drag link flip Je reel 1310 front & rear driveshafts 37" Nitto trail grapplers 17x9 atx slabs Evo mfg quarter pounder w/stinger Evo mfg rear fascia w/ d ring mounts
    37s
     
    Rc Jeep, Jan 16, 2017
    #3
    chris4x4[QUOTED][OP] likes this.
  4. Jan 16, 2017 at 8:24 AM
    #4
    chris4x4

    #4
    chris4x4 [OP] With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    I really don't want to go past a 34. Anything larger, and I would want to regear.
     
    chris4x4, Jan 16, 2017
    #4
  5. Jan 16, 2017 at 12:58 PM
    #5
    Rc Jeep

    #5
    Rc Jeep Well-Known Member

    Joined:
    Sep 8, 2016
    Member:
    #190
    Messages:
    465
    Gender:
    Male
    First Name:
    Ryan
    Vehicle:
    '16 Rubicon
    Evo mfg front coil overs Evo mfg rear coil overs Jks drag link flip Je reel 1310 front & rear driveshafts 37" Nitto trail grapplers 17x9 atx slabs Evo mfg quarter pounder w/stinger Evo mfg rear fascia w/ d ring mounts
    Are you on 3.73 or so you have the rubi 4.10?

    I have been running the 37s on 4.10 ( will be regear shortly) but it actually does fine on roads, and when off-roading 4 lo is still amazing.

    35s are like 20lbs lighter a tire than 37s. If you have 4.10s it would actually handle the 35s half decent.

    Also if your a manual the gearing doesn't seem to be as big of an issue as the autos.
     
    Rc Jeep, Jan 16, 2017
    #5
  6. Jan 16, 2017 at 2:21 PM
    #6
    chris4x4

    #6
    chris4x4 [OP] With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    I have an Auto, and 4.10 gears.
     
    chris4x4, Jan 16, 2017
    #6
  7. Jan 16, 2017 at 5:42 PM
    #7
    C2T

    #7
    C2T Well-Known Member

    Joined:
    Jul 31, 2016
    Member:
    #42
    Messages:
    763
    Gender:
    Male
    First Name:
    Richard
    Helena, Montana
    Vehicle:
    Jeep
    2.5" AEV Dual Sport lift, 35" Treadwright Guard Dogs, Black Rock Wheels, AEV Front & Rear Bumpers with Tire Carrier, Fuel Caddy 10 gal. Aux. fuel tank, Warn 9.5ti, 125' synthetic winch line, front axle skid, 20" LED light bar , Bilstein Shocks, steel steering skidplate,
    What year is you rig Chris??
     
    C2T, Jan 16, 2017
    #7
  8. Jan 16, 2017 at 5:44 PM
    #8
    chris4x4

    #8
    chris4x4 [OP] With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Its a 2013.
     
    chris4x4, Jan 16, 2017
    #8
  9. Jan 16, 2017 at 5:48 PM
    #9
    C2T

    #9
    C2T Well-Known Member

    Joined:
    Jul 31, 2016
    Member:
    #42
    Messages:
    763
    Gender:
    Male
    First Name:
    Richard
    Helena, Montana
    Vehicle:
    Jeep
    2.5" AEV Dual Sport lift, 35" Treadwright Guard Dogs, Black Rock Wheels, AEV Front & Rear Bumpers with Tire Carrier, Fuel Caddy 10 gal. Aux. fuel tank, Warn 9.5ti, 125' synthetic winch line, front axle skid, 20" LED light bar , Bilstein Shocks, steel steering skidplate,
    Then with a 34 or 35 you will likely do well. Those do well with 4:10 gears. Good choice.

    I ran 34s for a while when I had a 2" puck lift and now run 35s with a 2.5" spring lift.
     
    C2T, Jan 16, 2017
    #9
    Rc Jeep and chris4x4[QUOTED][OP] like this.
  10. Jan 16, 2017 at 5:51 PM
    #10
    chris4x4

    #10
    chris4x4 [OP] With sufficient thrust, pigs fly just fine Moderator

    Joined:
    Jul 19, 2016
    Member:
    #2
    Messages:
    4,068
    Gender:
    Male
    Thanks Richard! And everyone else! :)
     
    chris4x4, Jan 16, 2017
    #10
    Rc Jeep likes this.
  11. Jan 16, 2017 at 8:07 PM
    #11
    OFFGRID

    #11
    OFFGRID Well-Known Member

    Joined:
    Oct 3, 2016
    Member:
    #317
    Messages:
    2,018
    Gender:
    Male
    First Name:
    Peter
    Houston
    Vehicle:
    1979 Jeep CJ7, 258, TH350, NP208
    Howell fuel injection, header, HEI distributor, TH350, NP208, SOA lift with YJ springs in the front & GW springs in the Rear. AMC20 with G2 1 piece chromos trussed, Dana 30 with G2 chromos and 760x ujoints and MM Stainless Hubs, Geared 4.56. Tom Woods shafts, Metal cloaks, Caged, 37" Toyo MTs.
    I have always like a wider tire ride myself. Richard is right that the taller tire will probably have a softer ride, but a lot depends on the wheel width.
     
    OFFGRID, Jan 16, 2017
    #11
Register FREE to Reply!
To Top