1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Looking to buy a Jeep Wrangler YJ 1995 4.0 6 CYL manual transmission wiring harness.

Discussion in 'Wrangler YJ (1986-1995)' started by SprocketFox, Sep 9, 2019.

  1. Sep 9, 2019 at 5:58 PM
    #1
    SprocketFox

    #1
    SprocketFox [OP] New Member

    Joined:
    Sep 9, 2019
    Member:
    #3798
    Messages:
    1
    Gender:
    Male
    First Name:
    Nicolai
    Calvert County MD
    Vehicle:
    1994 Wrangler YJ
    I'm in desperate need of assistance finding a replacement connecting wire for my electric reverse light switch. A hole in my exhaust burned through the transmission wiring harness to my electric reverse light switch. I can't start my jeep without this wire. It's a 6 pin to a 2 pin. I've tried my local part stores, dealerships, and the local junk yards have no YJ's scrapped. I also can't find any 6 pin connectors (both male and female) that I can splice in instead.
    Any assistance on where to purchase a replacement is greatly appreciated!
    20190908_113007.jpg20190908_113010.jpg20190908_113250.jpg20190908_113307.jpg20190909_120308.jpg
     
    Last edited: Sep 10, 2019
    SprocketFox, Sep 9, 2019
    #1
  2. Sep 11, 2019 at 2:49 PM
    #2
    Jim Beam

    #2
    Jim Beam Well-Known Member

    Joined:
    Feb 11, 2019
    Member:
    #2891
    Messages:
    596
    Gender:
    Male
    First Name:
    Donald
    Vehicle:
    1986 CJ7
    Fuel Injection, Dana 44s, T18, 4.10s w/lockers
    Try an auto parts store or even an outfit like pep boys. Even an online search can come up with something. A better bet would be to bypass the plug with a direct connection, as plugs do loose current as electricity passes through them. If you do need a plug in a particular location, you can just add in a different plug that will take the current applied. There are also electrical parts houses that supply all the stuff needed to build a circut.
     
    Jim Beam, Sep 11, 2019
    #2
  3. Sep 11, 2019 at 3:13 PM
    #3
    Prerunner1982

    #3
    Prerunner1982 Well-Known Member

    Joined:
    Aug 4, 2017
    Member:
    #1745
    Messages:
    1,356
    Gender:
    Male
    First Name:
    Jon
    Vehicle:
    93 XJ 2 door
    Check the salvage yards for a Jeep Cherokee XJ of similar vintage, you may get lucky and find one with a 5 speed (4.0 liter) trans. You might look for at the Dodge Dakotas too as some also came with the AX15 trans.
    If it comes down to it as Donald said above, by pass the plug (connecting the right wires so the Jeep thinks the switch is there) and wire up an actual toggle switch for the reverse lights (or add your own reverse lights).
     
    Prerunner1982, Sep 11, 2019
    #3
  4. Sep 11, 2019 at 7:06 PM
    #4
    JKBob 25

    #4
    JKBob 25 Well-Known Member

    Joined:
    Mar 22, 2017
    Member:
    #1197
    Messages:
    3,893
    Gender:
    Male
    First Name:
    Bob
    Jersey Shore, NJ
    Vehicle:
    2016 JK Wrangler Sport
    JKBob 25, Sep 11, 2019
    #4
  5. Nov 11, 2019 at 2:42 PM
    #5
    kowdog

    #5
    kowdog Member

    Joined:
    Nov 11, 2019
    Member:
    #4076
    Messages:
    24
    Gender:
    Male
    First Name:
    Steven
    Vehicle:
    89 YJ
    Converting to 91 4.0L 5-spd. Bought a wrecked 91 Saraha 65k miles.
    Try dead jeep.com. I needed a 91 Dash harness for a 4.0 L and they had one for me so search there also, is my suggestion.
     
    kowdog, Nov 11, 2019
    #5
Register FREE to Reply!
To Top