1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Chrysler after market keep alarm

Discussion in 'Wrangler TJ (1996-2006)' started by Fester7373, Aug 19, 2019.

  1. Aug 19, 2019 at 5:21 PM
    #1
    Fester7373

    #1
    Fester7373 [OP] New Member

    Joined:
    Aug 19, 2019
    Member:
    #3712
    Messages:
    3
    can anyone tell me how to change the red light valet mode switch on the alarm.
     
    Fester7373, Aug 19, 2019
    #1
  2. Aug 19, 2019 at 5:24 PM
    #2
    Fester7373

    #2
    Fester7373 [OP] New Member

    Joined:
    Aug 19, 2019
    Member:
    #3712
    Messages:
    3
    If not how to disable/remove the alarm all together.

    7D92EE2C-672E-42C3-90B3-3F4F193356D3.jpg
    8AF9EFCE-84CE-439A-95EE-FB2069B2CFF1.jpg
    B19236EA-6554-4E93-BDDC-269909D1ABD5.jpg
     
    Fester7373, Aug 19, 2019
    #2
  3. Aug 19, 2019 at 6:42 PM
    #3
    aggrex

    #3
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,913
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Seems you have the switch in your hand already. Use some electric tape to cover and tuck under the dash. Without a wiring diagram of the aftermarket unit removal may create another issue.
     
    aggrex, Aug 19, 2019
    #3
  4. Aug 20, 2019 at 7:20 AM
    #4
    Fester7373

    #4
    Fester7373 [OP] New Member

    Joined:
    Aug 19, 2019
    Member:
    #3712
    Messages:
    3
    Do you know of a way to change the switch with one that works.
     
    Fester7373, Aug 20, 2019
    #4
  5. Aug 20, 2019 at 8:19 AM
    #5
    aggrex

    #5
    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,913
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    If you're up to it replacing the switch is not too difficult. Remove the protective sheathing, identify where the wires attach, get a comparable switch and replace. Anything more involved be sure to obtain a wiring diagram for the specific alarm system.
     
    aggrex, Aug 20, 2019
    #5
    JKBob 25 likes this.
Register FREE to Reply!
To Top