1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Power door locks not working 99 Grand Cherokee Laredo

Discussion in 'Grand Cherokee' started by 911 SUPERVISOR, Aug 15, 2019.

  1. Aug 15, 2019 at 6:06 AM
    #1
    911 SUPERVISOR

    #1
    911 SUPERVISOR [OP] Member

    Joined:
    Aug 2, 2019
    Member:
    #3630
    Messages:
    12
    Gender:
    Male
    First Name:
    Danny
    Vehicle:
    1999 grand cherokee laredo
    I have a new problem. The electric door locks are not working. Also the dome light is staying on even when you start the engine. And the only window that will roll down is the driver side. Could the problem be in the driver side switch panel. I still have the issue that if either of the passenger side doors are open the windows wont work or the door locks. Also I am unable to locate the door switches for the dome lights.
     
    Last edited: Aug 15, 2019
    911 SUPERVISOR, Aug 15, 2019
    #1
  2. Aug 15, 2019 at 6:57 AM
    #2
    Awrench

    #2
    Awrench Well-Known Member

    Joined:
    May 12, 2018
    Member:
    #2303
    Messages:
    975
    Gender:
    Male
    Vehicle:
    3 jeeps
    door ajar switches are incorporated in the door latch.
    Is the EVIC indicating a open door?

    Suspect the wiring at door to body connection is issue.
     
    Awrench, Aug 15, 2019
    #2
    911 SUPERVISOR[OP] likes this.
  3. Aug 15, 2019 at 8:14 AM
    #3
    911 SUPERVISOR

    #3
    911 SUPERVISOR [OP] Member

    Joined:
    Aug 2, 2019
    Member:
    #3630
    Messages:
    12
    Gender:
    Male
    First Name:
    Danny
    Vehicle:
    1999 grand cherokee laredo
    Evic is not showing any open doors.When I open the driver side doors and the hatch it registers them. But it does not register either passenger side door. Also where can I find a wiring schematic with color codes so I will know which wires to look at. Also how do you get that rubber boot out of the way to access the wires easier.
     
    911 SUPERVISOR, Aug 15, 2019
    #3
  4. Aug 15, 2019 at 8:22 AM
    #4
    Awrench

    #4
    Awrench Well-Known Member

    Joined:
    May 12, 2018
    Member:
    #2303
    Messages:
    975
    Gender:
    Male
    Vehicle:
    3 jeeps
    you would do your probing inside the door, or remove kick panel.

    I will add diagrams later its a busy day here.

    you could look here - register as a fleet manager but an often used safe library.
    http://www.bbbind.com/tsb-wiring-diagrams/
     
    Awrench, Aug 15, 2019
    #4
    aggrex likes this.
  5. Aug 15, 2019 at 10:46 AM
    #5
    911 SUPERVISOR

    #5
    911 SUPERVISOR [OP] Member

    Joined:
    Aug 2, 2019
    Member:
    #3630
    Messages:
    12
    Gender:
    Male
    First Name:
    Danny
    Vehicle:
    1999 grand cherokee laredo
    AWRENCH THANKS FOR ALL YOUR HELP. i WENT TO THAT SITE AND GOT WIRING DIAGRAMS. i FOUND A TAN WIRE WITH BLK STRIPE ON THE PASSENGER FRT DOOR INSIDE THE RUBBER BOOT THAT HAD BROKEN ALL THE WAY THROUGH. i SPLICED IT AND NOW EVERYTHING WORKS. YOU HAVE BEEN A LIFE SAVER.
     
    911 SUPERVISOR, Aug 15, 2019
    #5
    JeepMafiaMama likes this.
Register FREE to Reply!
To Top