1. Welcome to Jeeps.net!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Jeep discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Jeep owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Liberty “rear gate” warning

Discussion in 'Liberty' started by J323cole, Jan 14, 2018.

  1. Jan 14, 2018 at 9:32 AM
    #1
    J323cole

    J323cole [OP] New Member

    Joined:
    Jan 14, 2018
    Member:
    #2083
    Messages:
    3
    First Name:
    Jess
    Vehicle:
    2012 Jeep Liberty Jet
    None yet
    I recently purchased my 12’ Liberty. Friday i noticed the alarm going off on it’s own and went out to check it and the “rear gate” warning was on. I cannot lock the vehicle without the alarm going off because it thinks the gate is open. I’ve seen quite a few people with the same issue and wondering what was done to resolve this issue. Any helps greatly appreciated!
     
  2. Jan 14, 2018 at 10:07 AM
    #2
    aggrex

    aggrex Well-Known Member

    Joined:
    Sep 12, 2016
    Member:
    #203
    Messages:
    4,912
    DE
    Vehicle:
    Backcountry '16
    Tuffy>AEV>TTO>JW>STech>EVOcage>MagnaFlow>SpiderTrax>RockHard>TF>SpringTail>67design>Bolt>GPCA>Curt>
    Welcome! If the purchase was from a dealer they should get first crack at the problem otherwise check at the rear gate and surrounding areas for obstructions, dirty contacts, frayed or broken wiring, etc. Perhaps some WD40 could clean up dirty or sticking contacts/sensor.
     
  3. Jan 14, 2018 at 10:27 AM
    #3
    J323cole

    J323cole [OP] New Member

    Joined:
    Jan 14, 2018
    Member:
    #2083
    Messages:
    3
    First Name:
    Jess
    Vehicle:
    2012 Jeep Liberty Jet
    None yet
    Unfortunately i bought the car from a dealer that was 2 hours away. Going to take a look at the wiring this afternoon. The warning went away yesterday morning until i started driving it and it would flash on and off so I’m thinking it’s bad wiring or the sensor.
     
To Top